Netgear WNR834B 사용자 설명서
NETGEAR RangeMax™ NEXT Wireless Router WNR834B User Manual
4-8
Customizing Your Network Settings
v2.1, July 2007
Setting the MTU Size
The normal MTU value for most Ethernet networks is 1500 bytes, 1492 bytes for PPPoE
connections, or 1450 for PPTP connections. For some ISPs, you may need to reduce the MTU, but
this is rarely required and should not be done unless you are sure it is necessary for your ISP
connection. For more information, see
connections, or 1450 for PPTP connections. For some ISPs, you may need to reduce the MTU, but
this is rarely required and should not be done unless you are sure it is necessary for your ISP
connection. For more information, see
.
To change the MTU size:
1. Under MTU Size, enter a new size between 64 and 1500.
2. Click Apply to save the new configuration.
Configuring Static Routes
Static routes provide additional routing information to your router. Under normal circumstances,
the router has adequate routing information after it has been configured for Internet access, and
you do not need to configure additional static routes. You must configure static routes only for
unusual cases such as multiple routers or multiple IP subnets located on your network.
the router has adequate routing information after it has been configured for Internet access, and
you do not need to configure additional static routes. You must configure static routes only for
unusual cases such as multiple routers or multiple IP subnets located on your network.
From the main menu of the browser interface, under Advanced, click Static Routes to view the
Static Routes menu.
Static Routes menu.
To add or edit a static route:
Figure 4-4