Netgear WNR834B 사용자 설명서

5-8

Fine-Tuning Your Network

2. Click Add Custom Service.

3. In the Service Name box, type a descriptive name. 

4. In the Service Type box, select the protocol. If you are unsure, select TCP/UDP.

5. In the Starting Port box, type the beginning port number. 

•

If the application uses only a single port, type the same port number in the 
Ending Port box. 

•

If the application uses a range of ports, type the ending port number of the range in the 
Ending Port box. 

6. In the Server IP Address box, type the IP address of your local computer that will provide this 

service.

7. Click Apply. The service will appear in the list in the Port Forwarding /Port Triggering menu.

To edit or delete a Port Forwarding entry:

1. In the table, select the button next to the service name.

2. Click Edit Service or Delete Service.

If you host a Web server on your local network, you can use Port Forwarding to allow Web 
requests from anyone on the Internet to reach your Web server. 

To make a local Web server public: