Netgear MBRN3000-100NAS 사용자 설명서

points in your network. Enter 10 hexadecimal digits (any combination of 0

–

9, a

–

f, or 

A

–

F).

Select which of the four keys will be the default. 

Data transmissions are always encrypted using the default key. The other keys can be 
used only to decrypt received data. The four entries are disabled if WPA-PSK or WPA 
authentication is selected. 

Click Apply to save your settings.

Configuring WPA, WPA2, or WPA + WPA2

Both WPA and WPA2 provide strong data security. WPA with TKIP is a software 
implementation that can be used on Windows systems with Service Pack 2 or later; WPA2 
with AES is a hardware implementation; see your device documentation before implementing 
it. Consult the product documentation for your wireless adapter for instructions for configuring 
WPA settings.

If you use a wireless computer to configure wireless security 

settings, you will be disconnected when you click Apply. If this 
happens, reconfigure your wireless computer to match the new 
settings, or access the router from a wired computer to make further 
changes.

Log in to the router as described in 

on page 9.

Select Wireless Settings from the main menu. 

On the Wireless Setting screen, select the radio button for the WPA or WPA2 option of your 

choice.

For WPA-PSK or WPA2-PSK, enter the passphrase. 

To save your settings, click Apply.

Using Push 'N' Connect (WPS) to Configure Your 
Wireless Network

To use Push 'N' Connect, your wireless computers or devices must support Wi-Fi Protected 
Setup (WPS). Compatible equipment usually has the 

 WPS symbol on it. WPS can 

configure the network name (SSID) and set up WPA/WPA2 wireless security for the router 
and the wireless computer or device at the same time. 

Some considerations regarding WPS are: