Netgear FVS124G 사용자 설명서

8-2

Router and Network Management

Features of the VPN firewall that can be called upon to decrease WAN-side loading are as follows:

•

Service blocking

•

Block sites

•

Source MAC filtering

This feature is for Advanced Administrators only! Incorrect configuration will cause serious 

problems. 

You can control specific outbound traffic (i.e., from LAN to WAN). Outbound Services lists all 
existing rules for outbound traffic. If you have not defined any rules, only the default rule will be 
listed. The default rule allows all outgoing traffic. 

Each rule lets you specify the desired action for the connections covered by the rule:

•

BLOCK  always 

•

BLOCK by schedule, otherwise Allow 

•

ALLOW always 

•

ALLOW by schedule, otherwise Block 

As you define your firewall rules, you can further refine their application according to the 
following criteria:

•

LAN users—These settings determine which computers on your network are affected by this 
rule. Select the desired options: 

–

Any: All PCs and devices on your LAN. 

–

Single address: The rule will be applied to the address of a particular PC. 

–

Address range: The rule is applied to a range of addresses.

–

Groups: The rule is applied to a Group (you use the Network Database to assign PCs to 
Groups—see 

•

WAN Users—These settings determine which Internet locations are covered by the rule, based 
on their IP address.

–

Any: The rule applies to all Internet IP address. 

–

Single address: The rule applies to a single Internet IP address.