Netgear FVS124G 사용자 설명서
Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
8-30
Router and Network Management
202-10085-01, March 2005
Restoring and Backing Up the Configuration
IMPORTANT! Once you start restoring settings or erasing the router, do NOT try to go online,
turn off the router, shutdown the computer or do anything else to the router until it finishes
restarting! This should only take a minute or so. When the Test light turns off, wait a few more
seconds before doing anything with the router.
turn off the router, shutdown the computer or do anything else to the router until it finishes
restarting! This should only take a minute or so. When the Test light turns off, wait a few more
seconds before doing anything with the router.
The Restore and Backup options in the Settings Backup menu allow you to save and retrieve a file
containing your firewall’s configuration settings.
containing your firewall’s configuration settings.
•
To save your settings, select the Backup tab. Click the Backup button. Your browser will
extract the configuration file from the firewall and will prompt you for a location on your PC
to store the file. You can give the file a meaningful name at this time, such as pacbell.cfg.
extract the configuration file from the firewall and will prompt you for a location on your PC
to store the file. You can give the file a meaningful name at this time, such as pacbell.cfg.
•
To restore your settings from a saved configuration file, enter the full path to the file on your
PC or click the Browse button to browse to the file. When you have located it, click the
Restore button to send the file to the firewall. The firewall will then reboot automatically.
PC or click the Browse button to browse to the file. When you have located it, click the
Restore button to send the file to the firewall. The firewall will then reboot automatically.
An Alert page appears showing the status of restore operation.You need to manually restart the
router to make the restored settings effective.
router to make the restored settings effective.
IMPORTANT! Do not try to go online, turn off the router, shutdown the computer or do
anything else to the router until it finishes restarting! When the Test light turns off, wait a few
more seconds before doing anything with the router.
anything else to the router until it finishes restarting! When the Test light turns off, wait a few
more seconds before doing anything with the router.
Upgrading the Firewall Software
The routing software of the FVS124G VPN Firewall is stored in FLASH memory, and can be
upgraded as new software is released by NETGEAR. Upgrade files can be downloaded from
Netgear's website. If the upgrade file is compressed (.ZIP file), you must first extract the binary
(.TRX) file before sending it to the firewall. The upgrade file can be sent to the firewall using your
browser.
upgraded as new software is released by NETGEAR. Upgrade files can be downloaded from
Netgear's website. If the upgrade file is compressed (.ZIP file), you must first extract the binary
(.TRX) file before sending it to the firewall. The upgrade file can be sent to the firewall using your
browser.
Note: The Web browser used to upload new firmware into the FVS124G VPN Firewall must
support HTTP uploads. NETGEAR recommends using Microsoft Internet Explorer or Netscape
Navigator 3.0 or above.
support HTTP uploads. NETGEAR recommends using Microsoft Internet Explorer or Netscape
Navigator 3.0 or above.
From the Main Menu of the browser interface, under the Management heading, select the Router
Upgrade heading to display the menu shown below.
Upgrade heading to display the menu shown below.