Netgear WNDR3700V4 사용자 설명서

This section describes tips for troubleshooting some common problems.

Be sure to restart your network in this sequence:

Turn off and unplug the modem. 

Turn off the router and computers.

Plug in the modem and turn it on. Wait 2 minutes.

Turn on the router and wait 2 minutes.

Turn on the computers.

Check the Power LED 

 to verify correct router operation.

If the Power LED does not turn off within 2 minutes after you turn the router on, reset the 
router according to the instructions in 

109.

Make sure that the Ethernet cables are securely plugged in: 

The Internet LED on the router is lit if the Ethernet cable connecting the router and the 
modem is plugged in securely and the modem and router are turned on. 

For each powered-on computer connected to the router by an Ethernet cable, the 
corresponding numbered router LAN port LED is lit. 

Make sure that the wireless settings in the computer and router match exactly. 

For a wirelessly connected computer, the wireless network name (SSID) and wireless 
security settings of the router and wireless computer need to match exactly. 

If you set up an access list in the Advanced Wireless Settings screen, you have to add 
each wireless computer’s MAC address to the router’s access list.

Make sure that the network settings of the computer are correct: