Netgear WNDR3700V4 사용자 설명서
Advanced Settings
79
N600 Wireless Dual Band Gigabit Router WNDR3700v4
2.
Select Advanced > Advanced Setup > Wireless Repeating Function to display the
Wireless Repeating Function screen.
Scroll to view
more settings
more settings
3.
Select the Enable Wireless Repeating Function check box and select the Wireless Base
Station radio button.
4.
Enter the MAC address for one or more repeater units.
5.
Click Apply to save your changes.
Set Up a Repeater Unit
Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the
wireless connection to the base station.
wireless connection to the base station.
Note:
If you are using the WNDR3700v4 base station with a
non-NETGEAR router as the repeater, you might need to change
additional configuration settings. In particular, you should disable the
DHCP server function on the wireless repeater
non-NETGEAR router as the repeater, you might need to change
additional configuration settings. In particular, you should disable the
DHCP server function on the wireless repeater
AP.
To configure the router as a repeater unit:
1.
Log in to the router that will be the repeater.
2.
Select Basic > Wireless Settings and verify that the wireless settings match the base unit
exactly. The wireless security option must be set to None or WEP.
3.
Select Advanced > Wireless Repeating Function, and select the Enable Wireless
Repeating Function check box and the Wireless Repeater radio button.