Netgear 202-11171-04 사용자 설명서

Click Apply.

Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the 
wireless connection to the base station.

If you are using the D6200 base station with a non-NETGEAR WiFi 
DSL modem router as the repeater, you might need to change more 
configuration settings. In particular, you should disable the DHCP 
server function on the wireless repeater

 

AP.



Log in to the WiFi DSL modem router that is to be the repeater.

Select BASIC > Wireless Settings and verify that the wireless settings match those of the 

base unit exactly. 

The wireless security option has to be set to WEP or None.

Select ADVANCED > Advanced > Wireless Repeating Function. 

Select the Enable Wireless Repeating Function check box and the Wireless Repeater 

radio button.

Fill in the Repeater IP Address field. 

This IP address has to be in the same subnet as the base station, but different from the 
LAN IP address of the base station.

Click Apply.

Verify connectivity across the LANs. 

A computer on any wireless or wired LAN segment of the WiFi DSL modem router should 

be able to connect to the Internet or share files and printers with any other wireless or 
wired computer or server connected to the other access point.

By default, the WiFi DSL modem router blocks inbound traffic from the Internet to your 
computers except replies to your outbound traffic. You might need to create exceptions to 
this rule for these purposes:

To allow remote computers on the Internet to access a server on your local network. 

To allow certain applications and games to work correctly when their replies are not 
recognized by your WiFi DSL modem router.

Your WiFi DSL modem router provides two features for creating these exceptions: port 
forwarding and port triggering. The next sections provide background information to help you