Netgear 202-11171-04 사용자 설명서
Advanced Settings
120
D6200 WiFi DSL Modem Router
3.
Click the Add Custom Service.
4.
In the Name field, enter a descriptive name.
5.
In the Type list, select the protocol. If you are unsure, select TCP/UDP.
6.
In the Start Port field, enter the beginning port number.
•
If the application uses a single port, enter the same port number in the End Port field.
•
If the application uses a range of ports, enter the ending port number of the range in
the End Port field.
the End Port field.
7.
Click Apply.
The service appears in the list in the Port Forwarding/Port Triggering screen.
Edit or Delete a Port Forwarding Entry
To edit or delete a port forwarding entry:
1.
Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
2.
In the table, select the radio button next to the service name.
3.
Click Edit Service or Delete Service.
Application Example: Making a Local Web Server Public
If you host a web server on your local network, you can use port forwarding to allow web
requests from anyone on the Internet to reach your web server.
requests from anyone on the Internet to reach your web server.
To make a local web server public:
1.
Assign your web server either a fixed IP address or a dynamic IP address using DHCP
address reservation.
In this example, your WiFi DSL modem router always gives your web server an IP
address of 192.168.1.33.
address of 192.168.1.33.