Netgear 202-11171-04 사용자 설명서

Be sure to click Apply when you make changes.

If your wireless device finds your network, but the signal strength is weak, check these 
conditions:

Is your WiFi DSL modem router too far from your computer, or too close? Place your 
computer near the WiFi DSL modem router, but at least 6 feet away, and see whether the 
signal strength improves.

Is your wireless signal blocked by objects between the WiFi DSL modem router and your 
computer?

This section explains how to restore the factory settings, changing the WiFi DSL modem 
router’s administration password back to password. You can erase the current configuration 
and restore factory defaults in two ways:

Use the Erase function of the WiFi DSL modem router (see 

154. If you restore the factory settings and the WiFi DSL modem router fails to 

restart, or the green Power LED continues to blink, the unit might be defective. If the error 
persists, you might have a hardware problem and should contact technical support at 

Most network devices and routers contain a ping utility that sends an echo request packet to 
the designated device. The device then responds with an echo reply. You can easily 
troubleshoot a network by using the ping utility in your computer or workstation. 

You can ping the WiFi DSL modem router from your computer to verify that the LAN path to 
your WiFi DSL modem router is set up correctly.



From the Windows toolbar, click Start and select Run.

In the field provided, type ping followed by the IP address of the WiFi DSL modem router, 

as in this example:

Click OK.