Netgear 202-11171-04 사용자 설명서

You can set up the device name, workgroups, and network folders for your USB device. 



Select Advanced > USB Storage > Advanced Settings.

Configure the following settings:

Network Device Name. The default is ReadySHARE. This name is used to access 
the USB device connected to the WiFi DSL modem router. 

Workgroup. If you are using a Windows workgroup rather than a domain, the 
workgroup name is displayed here. The name works only in an operating system that 
supports NetBIOS, such as Microsoft Windows.

Access Method. Select any of the following check boxes to enable the access 

methods.

Network Connection. Enabled by default, this connection allows all users on the 
LAN to have access to the USB drive.

HTTP. Enabled by default. You can type 
http://readyshare.routerlogin.net/shares to access the USB drive.

HTTP (via internet). Disabled by default. If you select this check box, remote 
users can type http://<public IP address>/shares (for example, 
http://1.1.10.102/shares) or a URL domain name to access the USB drive over 
the Internet. This feature supports file uploading only.

FTP. Disabled by default.

FTP (via internet). Disabled by default. If you select this check box, remote users 
can access the USB drive through FTP over the Internet. This feature supports 
both downloading and uploading of files.