Netgear fvs114 사용자 설명서

다운로드
페이지 212
Reference Manual for the ProSafe VPN Firewall FVS114
6-16
Advanced Virtual Private Networking
202-10098-01, April 2005
The IKE Phase 2 parameters used in Scenario 1 are: 
TripleDES 
SHA-1 
ESP tunnel mode 
MODP group 2 (1024 bits) 
Perfect forward secrecy for rekeying 
SA lifetime of 3600 seconds (one hour) with no kilobytes rekeying 
Selectors for all IP protocols, all ports, between 10.5.6.0/24 and 172.23.9.0/24, using IPv4 
subnets 
FVS114 Scenario 1: FVS114 to Gateway B IKE and VPN Policies
Note: This scenario assumes all ports are open on the FVS114. You can verify this by reviewing 
the security settings as seen in the 
 on 
.
Figure 6-6: LAN to LAN VPN access from an 
FVS114 
to an 
FVS114
Use this scenario illustration and configuration screens as a model to build your configuration. 
1. Log in to the FVS114 labeled Gateway A as in the illustration.
Log in at the default address of 
http://192.168.0.1
 with the default user name of admin and 
default password of password, or using whatever password and LAN address you have 
chosen.
2. Configure the WAN (Internet) and LAN IP addresses of the FVS114.
a.
From the main menu Setup section, click the Basic Setup link to go back to the Basic 
Settings menu.
FVS114
Gateway B
Scenario 1
14.15.16.17
22.23.24.25
WAN IP
WAN IP
172.23.9.1/24
10.5.6.1/24
LAN IP
LAN IP
Gateway A
FVS114