Netgear fvs114 사용자 설명서

Maintenance

7-5

The Attached Devices menu contains a table of all IP devices that the firewall has discovered on 
the local network. From the main menu of the browser interface, under the Maintenance heading, 
select Attached Devices to view the table, shown below:

For each device, the table shows the IP address, NetBIOS Host Name (if available), and Ethernet 
MAC address. Note that if the firewall is rebooted, the table data is lost until the firewall 
rediscovers the devices. To force the firewall to look for attached devices, click the Refresh 
button.

The routing software of the FVS114 VPN Firewall is stored in FLASH memory, and can be 
upgraded as new software is released by NETGEAR. Upgrade files can be downloaded from 
NETGEAR's Web site. If the upgrade file is compressed (.ZIP file), you must first extract the 
binary (.BIN) file before sending it to the firewall. The upgrade file can be sent to the firewall 
using your browser. 

Note: The Web browser used to upload new firmware into the FVS114 VPN Firewall must support 
HTTP uploads. NETGEAR recommends using Microsoft Internet Explorer or Netscape Navigator 
5.0 or above. 

From the main menu of the browser interface, under the Maintenance heading, select the Router 
Upgrade heading to display the menu shown below.