Netgear fvs114 사용자 설명서
Reference Manual for the ProSafe VPN Firewall FVS114
Preparing Your Network
D-7
202-10098-01, April 2005
1.
On the Windows taskbar, click the Start button, and then click Run.
2.
Type
winipcfg
, and then click OK.
The IP Configuration window opens, which lists (among other things), your IP address, subnet
mask, and default gateway.
mask, and default gateway.
3.
From the drop-down box, select your Ethernet adapter.
The window is updated to show your settings, which should match the values below if you are
using the default TCP/IP settings that NETGEAR recommends for connecting through a
router or gateway:
using the default TCP/IP settings that NETGEAR recommends for connecting through a
router or gateway:
•
The IP address is between 192.168.0.2 and 192.168.0.254
•
The subnet mask is 255.255.255.0
•
The default gateway is 192.168.0.1
Configuring Windows NT4, 2000 or XP for IP Networking
As part of the PC preparation process, you may need to install and configure
TCP/IP on each networked PC. Before starting, locate your Windows CD; you may need to insert
it during the TCP/IP installation process.
it during the TCP/IP installation process.
Install or Verify Windows Networking Components
To install or verify the necessary components for IP networking:
1.
On the Windows taskbar, click the Start button, point to Settings, and then click Control
Panel.
Panel.
2.
Double-click the Network and Dialup Connections icon.
3.
If an Ethernet adapter is present in your PC, you should see an entry for Local Area
Connection. Double-click that entry.
Connection. Double-click that entry.
4.
Select Properties.
5.
Verify that Client for Microsoft Networks and Internet Protocol (TCP/IP) are present. If
not, select Install and add them.
not, select Install and add them.
6.
Select Internet Protocol (TCP/IP), click Properties, and verify that Obtain an IP address
automatically is selected.
automatically is selected.
7.
Click OK and close all Network and Dialup Connections windows.