Netgear fvs114 사용자 설명서
Reference Manual for the ProSafe VPN Firewall FVS114
2-6
Introduction
202-10098-01, April 2005
The FVS114 Rear Panel
The rear panel of the FVS114 VPN Firewall contains the port connections listed below.
Figure 2-2: FVS114 rear panel
Viewed from left to right, the rear panel contains the following features:
•
Factory default reset push button
•
Eight Ethernet LAN ports
•
Internet Ethernet WAN port for connecting the firewall to a cable or DSL modem
Table 2-1.
LED Descriptions
LED Label
Activity
Description
PWR
On
Power is supplied to the firewall.
TEST
On
Off
Off
The system is initializing.
The system is ready and running.
The system is ready and running.
INTERNET
100 (100 Mbps)
On
Off
Off
The Internet (WAN) port is operating at 100 Mbps.
The Internet (WAN) port is operating at 10 Mbps.
The Internet (WAN) port is operating at 10 Mbps.
LINK/ACT
(Link/Activity)
On
Blinking
Blinking
The Internet port has detected a link with an attached device.
Data is being transmitted or received by the Internet port.
Data is being transmitted or received by the Internet port.
LOCAL
100 (100 Mbps)
On
Off
Off
The Local port is operating at 100 Mbps.
The Local port is operating at 10 Mbps.
The Local port is operating at 10 Mbps.
LINK/ACT
(Link/Activity)
On
Blinking
Blinking
The Local port has detected a link with an attached device.
Data is being transmitted or received by the Local port.
Data is being transmitted or received by the Local port.
FACTORY DEFAULTS
Reset Button
Reset Button
DC Power
INTERNET
Port
LOCAL
Ports