Netgear fvs114 사용자 설명서

Connecting the Firewall to the Internet

3-7

The table below describes how you access the VPN firewall router, depending on the state of the 
VPN firewall router.

Note: The VPN 
firewall router is 
supplied in the 
factory default state. 
Also, the factory 
default state is 
restored when you 
use the factory reset 
button. See 

 for more 

information on this 
feature.

Automatic Access via 
the Smart Wizard 
Configuration 
Assistant

Any time a browser is opened on any computer connected to 
the VPN firewall router, the VPN firewall router will 
automatically connect to that browser and display the 
Configuration Assistant welcome page. 

There is no need to enter the VPN firewall router URL in the 
browser, or provide the login user name and password.

Manually enter a URL 
to bypass the Smart 
Wizard Configuration 
Assistant

You can bypass the Smart Wizard Configuration Assistant 
feature by typing 

 

 

in the browser address bar and pressing Enter. You will not 
be prompted for a user name or password.

This will enable you to manually configure the VPN firewall 
router even when it is in the factory default state. When 
manually configuring the firewall, you must complete the 
configuration by clicking Apply when you finish entering your 
settings. If you do not do so, a browser on any PC connected 
to the firewall will automatically display the firewall's 
Configuration Assistant welcome page rather than the 
browser’s home page.

Configuration 
Settings Have Been 
Applied

Enter the standard 
URL to access the 
VPN firewall router

Connect to the VPN firewall router by typing either of these 
URLs in the address field of your browser, then press Enter:

 

The VPN firewall router will prompt you to enter the user 
name of admin and the password. The default password is 
password.

Enter the IP address 
of the VPN firewall 
router 

Connect to the VPN firewall router by typing the IP address of 
the VPN firewall router in the address field of your browser, 
then press Enter. 192.168.0.1 is the default IP address of the 
VPN firewall router. The VPN firewall router will prompt you 
to enter the user name of admin and the password. The 
default password is password.