Netgear fvs114 사용자 설명서

다운로드
페이지 212
Reference Manual for the ProSafe VPN Firewall FVS114
Basic Virtual Private Networking
5-17
202-10098-01, April 2005
2.
The Connection Monitor screen for a similar connection is shown below:
Figure 5-19:  Connection Monitor screen
In this example you can see the following:
The FVS114 has a public IP WAN address of 22.23.24.25.
The FVS114 has a LAN IP address of 192.168.3.1.
The VPN client PC has a dynamically assigned address of 192.168.2.2.
While the connection is being established, the Connection Name field in this menu will say “SA” 
before the name of the connection. When the connection is successful, the “SA” will change to the 
yellow key symbol shown in the illustration above.
Transferring a Security Policy to Another Client
This section explains how to export and import a security policy as an .spd file so that an existing 
NETGEAR ProSafe VPN Client configuration can be copied to other PCs running the NETGEAR 
ProSafe VPN Client.
Exporting a Security Policy
The following procedure (
enables you to export a security policy as an .spd file.
Note: 
While your PC is connected to a remote LAN through a VPN, you might not have 
normal Internet access. If this is the case, you will need to close the VPN connection in 
order to have normal Internet access.