Netgear D7000 사용자 설명서

The statistics for the WAN (Internet over Ethernet) port, LAN (Ethernet)
ports, WLAN b/g/n port, and WLAN a/n/ac port. For each port, the
screen displays the information that is described in this table.

Port

The link status of the port.

Status

The number of packets that were transmitted on this port since reset
or manual clear.

TxPkts

The number of packets that were received on this port since reset or
manual clear.

RxPkts

The number of packets that collided on this port since reset or manual
clear.

Collisions

The number of bytes per second that were transmitted on this port
since reset or manual clear.

Tx B/s

The number of bytes per second that were received on this port since
reset or manual clear.

Rx B/s

The time elapsed since this port acquired the link.

Up Time

In addition to the xDSL firmware version, the screen displays the ADSL link information that is
described in this table.

The downstream and upstream link rates in Kbps.

Link Rate

The downstream and upstream Line Attenuation (LATN) in dB. The
LATN expresses the signal quality.

Line Attenuation

The downstream and upstream Signal-to-Noise Ratio Margin (SNRM)
in dB. The SNRM expresses the signal quality in relation to interference.

Noise Margin

The interval at which the statistics are updated in this screen.

Poll Interval

You can change the polling frequency or stop traffic polling.