Netgear D7000 사용자 설명서

If not, check the WiFi LED 

 on the top of the modem router. If this LED is off, both WiFi radios

might be disabled. For more information about the WiFi radios, see 

 on page

123.

If you disabled the modem router’s SSID broadcast, your WiFi network is hidden and does not display
in your WiFi client’s scanning list. (By default, SSID broadcast is enabled.) For more information, see

Does your WiFi device support the security that you are using for your WiFi network (WEP, WPA, or
WPA2)? For information about changing the WiFi security, see 

on page 102.

If you want to change the WiFi settings of the modem router’s main network, use a wired
connection to avoid being disconnected when the new WiFi settings take effect.

If your WiFi device finds your network but the signal strength is weak, check these conditions:

Is your modem router too far from your WiFi device or too close? Place your WiFi device near the
modem router but at least 6 feet (1.8 meters) away and see whether the signal strength improves.

Are objects between the modem router and your WiFi device blocking the WiFi signal?

Most network devices and routers contain a ping utility that sends an echo request packet to the designated
device. The device then responds with an echo reply. You can easily troubleshoot a network using the
ping utility in your computer or workstation.

You can ping the modem router from your computer to verify that the LAN path to your modem router is
set up correctly.

To ping the modem router from a Windows computer:

From the Windows taskbar, click the Start button and select Run.

In the field provided, enter ping followed by the IP address of the modem router, as in this example:

Click the OK button.

A message such as the following one displays:

Pinging <IP address> with 32 bytes of data

If the path is working, you see this message:

Reply from < IP address >: bytes=32 time=NN ms TTL=xxx