Netgear CG814M 사용자 설명서
Reference Manual for the Model CG814M Wireless Cable Modem Gateway
Connecting the Gateway to the Internet
2-7
The found new hardware Windows installation wizard will prompt you for the drivers.
Browse to the CD and install the USB driver by clicking through the Windows wizard prompts.
Wireless
Detailed instructions on configuring your wireless devices for TCP/IP networking are provided in
the next chapter. However, if you already have a functioning wireless network and you wish to use
a wireless PC to initially configure the router, you will need to change the settings of that PC to
match the default settings of the router:
the next chapter. However, if you already have a functioning wireless network and you wish to use
a wireless PC to initially configure the router, you will need to change the settings of that PC to
match the default settings of the router:
•
The SSID should be Wireless (note the capitalization).
•
The Channel should be set to 6.
•
WEP encryption is disabled.
Connecting to your Cable Service Provider
Using a coaxial cable provided by your cable service provider, connect the coaxial cable jack on
you wall to the cable connector on the gateway.
you wall to the cable connector on the gateway.
The Cable Link LED will be solid green when your gateway has synchronized with the cable
headend.
headend.