Netgear C3000 사용자 설명서

Up to 145 Mbps is the default setting, which allows 802.11n and 802.11g wireless 
devices to join the network. g & b supports up to 54 Mbps. The 300-Mbps setting allows 
802.11n devices to connect at this speed.

Click the Apply button.

Your settings are saved.

If you connected wirelessly to the network and you changed the SSID, you are 
disconnected from the network.

Make sure that you can connect wirelessly to the network with its new settings. 

If you cannot connect wirelessly, check the following:

Is your computer or wireless device connected to another wireless network in your 
area? Some wireless devices automatically connect to the first open network without 
wireless security that they discover.

Is your computer or wireless device trying to connect to your network with its old 
settings (before you changed the settings)? If so, update the wireless network 
selection in your computer or wireless device to match the current settings for your 
network.

Your modem router comes with preset WPA2 or WPA security. The password that you enter to 
connect to your network is unique to your modem router and is on the label. NETGEAR 
recommends that you use the preset security, but you can change the settings. NETGEAR 
recommends that you do not disable security.



Launch a web browser from a computer or wireless device that is connected to the 

network.

Type http://routerlogin.net or http://192.168.0.1.

A login screen displays.

Enter the modem router user name and password.

The user name is admin. The default password is password. The user name and 
password are case-sensitive.

The BASIC Home screen displays.

Select Wireless.

Under Security Options, select a radio button for one of the following WPA options:

The WPA2 options use the newest standard for the strongest security, but some older 
computers and wireless devices cannot use WPA2. By default, the WPA-PSK [TKIP] +