Netgear D6300 사용자 설명서
NETGEAR genie ADVANCED Home
55
D6300 WiFi DSL Modem Router
router’s LAN. The assigned default gateway address is the LAN address of the WiFi modem
router. The WiFi modem router assigns IP addresses to the attached computers from a pool
of addresses specified in this screen. Each pool address is tested before it is assigned to
avoid duplicate addresses on the LAN. For most applications, the default DHCP and TCP/IP
settings of the WiFi modem router are satisfactory.
router. The WiFi modem router assigns IP addresses to the attached computers from a pool
of addresses specified in this screen. Each pool address is tested before it is assigned to
avoid duplicate addresses on the LAN. For most applications, the default DHCP and TCP/IP
settings of the WiFi modem router are satisfactory.
You can specify the pool of IP addresses to be assigned by setting the starting IP address
and ending IP address. These addresses should be part of the same IP address subnet as
the WiFi modem router’s LAN IP address. Using the default addressing scheme, you should
define a range between 192.168.0.2 and 192.168.0.254, although you might want to save
part of the range for devices with fixed addresses.
and ending IP address. These addresses should be part of the same IP address subnet as
the WiFi modem router’s LAN IP address. Using the default addressing scheme, you should
define a range between 192.168.0.2 and 192.168.0.254, although you might want to save
part of the range for devices with fixed addresses.
The WiFi modem router delivers the following parameters to any LAN device that requests
DHCP:
DHCP:
•
An IP address from the range you have defined
•
Subnet mask
•
Gateway IP address (the WiFi modem router’s LAN IP address)
•
Primary DNS server (if you entered a primary DNS address in the Internet Basic Settings
screen; otherwise, the WiFi modem router’s LAN IP address)
screen; otherwise, the WiFi modem router’s LAN IP address)
•
Secondary DNS server (if you entered a secondary DNS address in the Internet Basic
Settings screen)
Settings screen)
To use another device on your network as the DHCP server, or to manually configure the
network settings of all of your computers, clear the Use Router as DHCP Server check box
and click Apply. Otherwise, leave this check box selected. If this service is not enabled and
no other DHCP server is available on your network, you need to set your computers’ IP
addresses manually or they are not able to access the WiFi modem router.
network settings of all of your computers, clear the Use Router as DHCP Server check box
and click Apply. Otherwise, leave this check box selected. If this service is not enabled and
no other DHCP server is available on your network, you need to set your computers’ IP
addresses manually or they are not able to access the WiFi modem router.
Address Reservation
When you specify a reserved IP address for a computer on the LAN, that computer always
receives the same IP address each time it accesses the WiFi modem router’s DHCP server.
Reserved IP addresses should be assigned to computers or servers that require permanent
IP settings.
receives the same IP address each time it accesses the WiFi modem router’s DHCP server.
Reserved IP addresses should be assigned to computers or servers that require permanent
IP settings.
To reserve an IP address:
1.
In the Address Reservation section of the screen, click the Add button. The following
screen displays:
2.
In the IP Address field, type the IP address to assign to the computer or server. (Choose an
IP address from the WiFi modem router’s LAN subnet, such as 192.168.0.x.)