Netgear D6300 사용자 설명서

USB Drive Requirements

The WiFi modem router works with 1.0 and 1.1 (USB Full Speed) and 2.0 (USB High Speed) 
standards. The approximate USB bus speeds are shown in the following table. Actual bus 
speeds can vary, depending on the CPU speed, memory, speed of the network, and other 
variables.

USB 1.1

12 Mbits

USB 2.0

480 Mbits

The WiFi modem router should work with most USB-compliant external flash and hard drives. 
For the most up-to-date list of USB drives supported by the WiFi modem router, visit:

The WiFi modem router supports both read and write access for FAT16, FAT32, NTFS, and 
Linux file systems (EXT2 and EXT3).

Some USB external hard drives and flash drives require drivers to 
be loaded into the computer before the computer can access the 
USB device. Such USB devices do not work with the WiFi modem 
router.

ReadySHARE Access

Once you have set up your WiFi modem router, you can connect any USB storage device 
and share the contents with other users on your network.

You can access your USB device in any of the following ways:

On Windows 7, Windows XP, Windows Vista, and Windows 2000 systems, select Start > 
Run, and enter \\readyshare in the dialog box. Click OK.

On Windows 7, Windows XP, Windows Vista, and Windows 2000 systems, open Internet 
Explorer or Safari, and enter \\readyshare in the address bar.

On Mac OS X (version 10.2 or later), enter smb://readyshare in the address bar.

In My Network Places, enter \\readyshare in the address bar.