Netgear CVG824G 사용자 설명서

Installing the Gateway

1-3

The label on the bottom of the gateway identifies the connections on the rear panel. The rear panel 
includes the following connections, viewed from left to right, as illustrated in 

.

•

Wireless Antenna: The gateway ships with the wireless antenna already attached.

•

Power: AC power adapter input.

•

Reset button: Resets the gateway to its factory defaults.

•

Four Ethernet LAN ports: Use these ports to connect local computers.

•

USB port: If the USB driver is installed, you can connect a local computer to this port.

•

Coaxial cable connector: Attach coaxial cable to the cable service provider’s connection.

•

Two Voice/Phone ports: With VoIP service, connect one or two handsets to these ports.

Wireless 

Green Solid

The wireless connection is operating normally.

Green Blink

Data is being transmitted or received on the wireless interface.

Off

No wireless link is detected.

USB Port

Green Solid

A USB device is connected to the USB port.

Off

No USB device is connected.

Voice Ports

 

(1 and 2)

Green Solid

Registered with the Call Agent.

Green Blink

There is an active call.

Green Slow 
Blink

Phone is “on-hook”; registration with Call Agent is in progress.

Off

No phones are connected to the voice port.

LAN (Local 
Area Network) 

Green On

The Local port has detected link with a 100 Mbps device.

Green Blink

Data is being transmitted or received at 100 Mbps.

Amber On

The Local port has detected link with a 10 Mbps device.

Amber Blink

Data is being transmitted or received at 10 Mbps.

Off

No link is detected on this port.