Netgear CVG824G 사용자 설명서

Wireless Configuration

2-3

For a new wireless network, print or copy this form and fill in the settings. For an existing wireless 
network, the person who set up or is responsible for the network can get the settings. Be sure to set 
the Regulatory Domain correctly as the first step.

•

SSID. The Service Set Identification (SSID) identifies the wireless local area network. 
NETGEAR is the default SSID. However, you may customize it by using up to 32 
alphanumeric characters. Write your customized SSID on the line below. 

____________________________________________________

The SSID in the wireless voice gateway is the SSID you configure in the wireless adapter card. 
All wireless nodes in the same network must be configured with the same SSID.

Circle one: Open System or Shared Key. Choose Shared Key for more security.

To use Shared Key, all devices in the network must be set to Shared Key and have the same 
keys in the same positions as those in the CVG824G.

WEP Encryption Keys. For all four keys, choose the Key Size. Circle one: 64, or 128 bits.

Key 1: ______________________________________________

Key 2: ______________________________________________ 

Key 3: ______________________________________________ 

Key 4: ______________________________________________ 

WPA-PSK (Pre-Shared Key) and WPA2-PSK. Record the WPA-PSK or WPA2-PSK key. 

Key: _____________________________________________ (8-63 characters)

•

WPA and WPA2 RADIUS Settings. For WPA and WPA2, record the following settings for 
the primary and secondary RADIUS servers.

Server Name/IP Address: _____________________________________________ 

Port: _____________________________________________

Shared Key: _____________________________________________

Use the procedures described in the following sections to configure the CVG824G. Store this 
information in a safe place.