Netgear D6200-100NAS 사용자 설명서



Select ADVANCED > Advanced Setup > Wireless Settings.

Under WPS Settings, configure the following settings:

Router’s PIN. This PIN is the PIN number you use on a registrar (such as from 
Network Explorer on a Vista Windows computer) to configure the router’s wireless 
settings through WPS. You can also find the PIN on the router’s product label.

Disable Router’s PIN. You can configure the router’s wireless settings or add a 
wireless client through WPS using the router’s PIN only when the PIN is enabled. The 
router’s PIN can be disabled temporarily when the router detects suspicious attempts 
to break into the router’s wireless settings by using the router’s PIN through WPS. 
You can manually enable this function by clearing the check box and clicking the 
Apply button.

Keep Existing Wireless Settings. This setting shows whether the router is in the 
WPS configured state. If this check box is not selected, adding a new wireless client 
changes the router’s wireless settings to an automatically generated random SSID 
and security key. In addition, when this check box is selected, some external 
registrars (such as Network Explorer on Vista Windows) might not see the router.

Configuring the basic wireless settings from the router’s web management interface 
selects this option automatically.

Click Apply.

Wireless Access List

By default, any wireless computer that is configured with the correct SSID is allowed access 
to your wireless network. For increased security, restrict access to the wireless network to 
allow only specific computers based on their MAC addresses. 



Select ADVANCED > Advanced Setup > Wireless Settings.

Click the Set Up Access List button.