Netgear D6200-100NAS 사용자 설명서

Click Apply.

Your changes are saved.

Manage USB Print and Scan Jobs

The NETGEAR USB Control Center utility runs in the background on each computer in your 
network. This utility manages the printing queue and handling for the USB printer connected 
to your WiFi DSL modem router.

After you activate the utility on each computer in the network, the status of the USB printer is 
Available for all of the computers.

When the status is Available, you can use the USB printer from any computer in the 
network. The utility on each computer automatically manages the printing queue and 
handling. The status of the USB printer appears as Available on all of the computers 
when no print jobs are in process.

When the status is Manually connected by xxx, only the xxx computer can use the printer. 
Other network devices must wait until the xxx computer has released the connection, or 
until the connection times out (the default time-out value is 30 seconds). 

You can click the Disconnect button at any time to release the connection.

You can set the value for the default time-out time from the Configuration screen. For 
more information, see 

Some firewall software, such as Comodo, blocks the NETGEAR USB Control Center utility 
from accessing the USB printer. If you do not see the USB printer in the utility, you can 
disable the firewall temporarily to allow the utility to work.

If your USB printer supports scanning, you can also use the USB printer for scanning. For 
more information, see 

The NETGEAR USB Control Center

The NETGEAR USB Control Center shows the availability status of the USB devices.

The NETGEAR USB Control Center utility must be running for the computer to be able to 
print to the USB printer attached to the router. If you exit the utility, printing does not work.