Netgear D500 and D1500 사용자 설명서

ADSL2. Legacy version of ADSL2.

ADSL2+. ADSL2+ provides the fastest downstream rates and can interoperate with 
ADSL2 and ADSL (g.dmt).

Click the upper Apply button.

Your DSL mode changes are saved.

From the Multiplexing Method menu, select LLC-based or VC-based, as indicated by your 
ISP.

For the VPI, type a number between 0 and 255, as indicated by your ISP. 

The default setting is 8.

For the VCI, type a number between 32 and 65535, as indicated by your ISP.

The default setting is 35.

Click the lower Apply button.

Your PVC changes are saved.

When you set up the modem router for cable or fiber (Ethernet WAN) service, you must 
change the default WAN connection preference (see 

18). If you want to change the WAN connection preference, use the 

information in this section.

The default WAN connection preference is to use the ADSL port for an Internet connection 
over DSL service. With this option, both Ethernet ports are available for LAN connections. 
The other WAN connection preference is to use Ethernet port 2 for an Internet connection 
over cable or fiber service. With this option, only Ethernet port 1 is available for a LAN 
connection.



Launch an Internet browser from a computer or WiFi device that is connected to the 
network.

Type http://www.routerlogin.net or http://www.routerlogin.com.

A login screen displays.

Enter the user name and password for the modem router.

The user name is admin. The default password is password. The user name and 
password are case-sensitive.

Click the OK button.

The BASIC Home screen displays.