Netgear D500 and D1500 사용자 설명서
Manage the WAN and LAN Network Settings
67
N150 and N300 WiFi DSL Modem Routers
6.
To enable port scan and DoS protection, clear the Disable Port Scan and DoS Protection
check box.
check box.
Note:
Enabling port scan and DoS protection might affect the performance of
the modem router.
the modem router.
7.
To enable modem router to respond to a ping, select the Respond to Ping on Internet
Port check box.
Port check box.
8.
Click the Apply button.
Your changes are saved.
Manage IGMP Proxying and VPN Pass-Through
IGMP proxying allows a computer on the local area network (LAN) to receive the multicast
traffic it is interested in from the Internet. If you do not need this feature, leave it disabled it,
which is the default setting.
traffic it is interested in from the Internet. If you do not need this feature, leave it disabled it,
which is the default setting.
When Network Address Translation (NAT) is enabled in the modem router (see
causing these packets to become invalid. VPN pass-through allows encrypted tunnel packets
to go through without being filtered and is enabled by default for IPSec, PPTP, and L2TP
packets. Do not disable VPN pass-through for IPSec, PPTP, or L2TP unless a specific
reason exists.
to go through without being filtered and is enabled by default for IPSec, PPTP, and L2TP
packets. Do not disable VPN pass-through for IPSec, PPTP, or L2TP unless a specific
reason exists.
To change the default IGMP proxying and VPN pass-through settings:
1.
Launch an Internet browser from a computer or WiFi device that is connected to the
network.
network.
2.
Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3.
Enter the user name and password for the modem router.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
4.
Click the OK button.
The BASIC Home screen displays.
5.
Select ADVANCED > Setup > WAN Setup.
The WAN Setup screen displays.