Netgear DG834GUV5 사용자 설명서

Configuring Your Internet Connection

1-7

The default ADSL settings of your modem router work fine for most ISPs. However, some ISPs 
use a specific multiplexing method and virtual circuit number for the virtual path identifier (VPI) 
and virtual channel identifier (VCI).

If your ISP provided you with a multiplexing method or VPI/VCI number, then enter the setting:

1. From the main menu, select ADSL Settings.

2. In the Multiplexing Method drop-down list, select LLC-based or VC-based. The default is 

LLC-based.

This field 
appears only if 
no login is 
required.

Router MAC Address

The Ethernet MAC address that will be used by the modem 
router on the Internet port. Some ISPs register the Ethernet 
MAC address of the network interface card in your computer 
when your account is first opened. They will then accept traffic 
only from the MAC address of that computer. This feature 
allows your modem router to masquerade as that computer by 
“cloning” its MAC address. 
• Use Default Address. Use the default MAC address.
• Use Computer MAC Address. The modem router will 

capture and use the MAC address of the computer that you 
are now using. You must be using the one computer that is 
allowed by the ISP.

• Use This MAC Address. Enter the MAC address that you 

want to use.

a. Disable NAT only if you plan to install the modem router in a setting where you will be manually administering the IP address 

space on the LAN side of the router.

Note: For information about how to install ADSL filters, see the NETGEAR Router Setup 

Manual.

Note: You must use the Setup Wizard to select the correct country for the default ADSL 

settings to work. The default settings are set for Telkom ADSL.