Netgear DG834GUV5 사용자 설명서

Configuring Your Wireless Network and Security Settings

2-17

For increased security, you can restrict access to the wireless network to allow only specific PCs 
based on their MAC addresses. You can restrict access to only trusted PCs so that unknown PCs 
cannot wirelessly connect to the ADSL2+ Modem Wireless Router. MAC address filtering adds an 
obstacle against unwanted access to your network, but the data broadcast over the wireless link is 
fully exposed. 

To restrict access based on MAC addresses:

1. Log in to the modem router at its default LAN address of http://10.0.0.2 with its default user 

name of admin, and default password of admin, or using whatever user name, password, and 
LAN address you have chosen for the modem router.

2. From the main menu, select Wireless Settings, and then click Setup Access List to display the 

Wireless Station Access List screen.

The trusted wireless stations listed on this screen are the wireless clients that will have access 
to the wireless network when the list is enabled. 

Note: If you configure the Product Family from a wireless computer, add your 

computer’s MAC address to the access list. Otherwise you will lose your 
wireless connection when you click Apply. You must then access the modem 
router from a wired computer, or from a wireless computer that is on the access 
control list, to make any further changes.