Netgear DG834GUV5 사용자 설명서

3-6

Protecting Your Network

Because the 

modem router

 uses Network Address Translation (NAT), your network presents only 

one IP address to the Internet, and outside users cannot directly access any of your local 
computers. However, by defining an inbound rule you can make a local server (for example, a Web 
server or game server) visible and available to the Internet. The rule tells the modem router to 
direct inbound traffic for a particular service to one local server based on the destination port 
number. This is also known as port forwarding.

Remember that allowing inbound services opens holes in your firewall. Enable only those ports 
that are necessary for your network. Following are two application examples of inbound rules.

If you host a public Web server on your local network, you can define a rule to allow inbound Web 
(HTTP) requests from outside IP addresses to the IP address of your Web server at any time of day. 
This rule is shown in the following figure:

The settings are:

•

Service. From this list, select the application or service to be allowed or blocked. The list 
already displays many common services, but you are not limited to these choices. Use the 
Services screen to add any additional services or applications that do not already appear.

Note: Some broadband ISP accounts do not allow you to run any server processes (such 

as a Web or FTP server) from your location. Your ISP might periodically check for 
servers and might suspend your account if it discovers any active services at your 
location. If you are unsure, see the acceptable use policy of your ISP.