Netgear DGFV338 사용자 설명서

6-8

Router and Network Management

3. First enter the old password, and then enter the new password—twice. Click Apply. 

4. Change the login idle time-out by changing the number of minutes. Click Apply. 

The password and time-out values you entered will revert back to password and 5 minutes, 
respectively, after a factory default reset.

Using the Remote Management page, you can allow an administrator on the Internet to configure, 
upgrade, and check the status of your ProSafe DGFV338. You must be logged in locally to enable 
remote management (see 

Note: If you make the administrator login time-out value too large, you will wait a 

long time before you are able to log back into the router if your previous login 
was disrupted (i.e., you did not click Logout on the Main Menu bar to log 
out).

Note: Be sure to change the firewall default configuration password to a very secure 

password. The ideal password should contain no dictionary words from any 
language, and should be a mixture of letters (both upper and lower case), numbers, 
and symbols. Your password can be up to 30 characters. See 

 for the procedure on how to do this.