Netgear DGFV338 사용자 설명서

LAN Configuration

7-3

4. DHCP Server. By default, the router will function as a DHCP server, providing TCP/IP 

configuration for all computers connected to the router's LAN. If another device on your 
network will be the DHCP server, or if you will manually configure all devices, select the 
Disable DHCP Server radio button. If the Enable DHCP Server radio button is selected, 
complete the following fields:

a. DHCP Log. Click this button to see the IP addresses which have been allocated by the 

DHCP Server to PCs and other DHCP clients. 

b. Starting IP Address. This box specifies the first of the contiguous addresses in the IP 

address pool. 192.168.1.2 is the default start address. 

Ending IP Address. This box specifies the last of the contiguous addresses in the IP 
address pool. 192.168.1.254 is the default ending address. 

d. WINS Server. This box can specify the Windows NetBios Server IP if one is present in 

your network. 

Lease Time. This box specifies the Lease time to be given to the DHCP Clients.

5. Click Apply to save your settings.

When you specify a reserved IP address for a PC on the LAN, that PC will always receive the 
same IP address each time it access the firewall’s DHCP server. Reserved IP addresses should be 
assigned to servers that require permanent IP settings

Note: If you change the LAN IP address of the firewall while connected through the 

browser, you will be disconnected. You must then open a new connection to 
the new IP address and log in again.