Netgear DGFV338 사용자 설명서

7-10

LAN Configuration

5. Click Reset to discard any changes and revert to the previous settings.

6. Click Save to save your settings.

For example, you may require a static route if:

•

Your primary Internet access is through a cable modem to an ISP.

•

You have an ISDN firewall on your home network for connecting to the company where you 
are employed. This firewall’s address on your LAN is 192.168.1.100.

•

Your company’s network is 134.177.0.0.

When you first configured your firewall, two implicit static routes were created. A default route 
was created with your ISP as the gateway, and a second static route was created to your local 
network for all 192.168.1.x addresses. With this configuration, if you attempt to access a device on 
the 134.177.0.0 network, your firewall will forward your request to the ISP. The ISP forwards your 
request to the company where you are employed, and the request will likely be denied by the 
company’s firewall.

In this case you must define a static route, telling your firewall that 134.177.0.0 should be accessed 
through the ISDN firewall at 192.168.1.100. 

In this example:

•

The Destination IP Address and IP Subnet Mask fields specify that this static route applies to 
all 134.177.x.x addresses. 

•

The Gateway IP Address fields specifies that all traffic for these addresses should be 
forwarded to the ISDN firewall at 192.168.1.100. 

•

A Metric value of 1 will work since the ISDN firewall is on the LAN. 

•

Private is selected only as a precautionary security measure in case RIP is activated.

Universal Plug and Play (UPnP) can improve the overall networking experience through automatic 
discovery and device interoperability. UPnP helps devices, such as Internet appliances and 
computers, access the network and connect to other devices as needed. UPnP devices can 
automatically discover the services from other registered UPnP devices on the network.