Netgear DGFV338 사용자 설명서

3-14

Wireless Configuration

Not all wireless adapters support WPA and WPA2. Client software is required on the client:

•

Windows XP and Windows 2000 with Service Pack 3 or above do include the client software 
that supports WPA. The wireless adapter hardware and driver must also support WPA. 

•

Service Pack 3 does not include the client software that supports WPA2. Make sure your client 
card supports WPA2. The wireless adapter hardware and driver must also support WPA2.

Consult the product documentation for your wireless adapter; WPA client software for instructions 
on configuring WPA settings; and WPA2 client software for instructions on configuring WPA2 
settings.

To configure WPA-PSK and WPA2-PSK:

1. From the Wireless Security Type section, select WPA and WPA2. By default, WPA with 

PSK is selected and Encryption will be set to TKIP+AES.

2. Enter the Passphrase (Network Key).The 256-bit key used for encryption is generated from the 

Passphrase.

3. Enter the Key Lifetime (in minutes). This determines how often the encryption key is changed. 

(Shorter periods give better security, but adversely affect performance.)