2WIRE 100SW 사용자 설명서
20
Note:
If you use a 2Wire wireless adapter for wireless networking, the HomePortal Setup Wizard software
automatically configures it to communicate with the HomePortal during setup, but you will need to install
the driver. See Appendix A for detailed installation instructions.
the driver. See Appendix A for detailed installation instructions.
If you are NOT using a 2Wire wireless adapter, you will need to manually configure your adapter of choice
to communicate with the HomePortal BEFORE installing the HomePortal software. See Appendix B for
detailed configuration instructions.
to communicate with the HomePortal BEFORE installing the HomePortal software. See Appendix B for
detailed configuration instructions.
1.
Install your wireless adapter according to the manufacturer’s instructions (see note above).
After your adapter is successfully installed, repeat Step 3 “Install the HomePortal
Software” on page 15.
Software” on page 15.
Wireless Connection
Model 100SW only
Requires a computer with 802.11b wireless adapter installed