Perle Systems DS1 사용자 설명서
Serial Port Profiles
96
IOLAN DS1/TS2 User’s Guide, Version 3.4
Enable Line Mode When enabled, keyboard input is not sent to the remote host until
Enter
is
pressed, otherwise input is sent every time a key is pressed.
Default: Disabled
Map CR to CRLF
When enabled, maps carriage returns (CR) to carriage return line feed (CRLF).
Default: Disabled
Interrupt
Defines the interrupt character. Typing the interrupt character interrupts the
current process. This value is in hexadecimal.
current process. This value is in hexadecimal.
Default: 3 (ASCII value
^C
)
Quit
Defines the quit character. Typing the quit character closes and exits the current
telnet session. This value is in hexadecimal.
telnet session. This value is in hexadecimal.
Default: 1c (ASCII value
FS
)
EOF
Defines the end-of-file character. When
Enable Line Mode
is enabled, entering
the EOF character as the first character on a line sends the character to the
remote host. This value is in hexadecimal.
remote host. This value is in hexadecimal.
Default: 4 (ASCII value
^D
)
Erase
Defines the erase character. When
Line Mode
is
Off
, typing the erase character
erases one character. This value is in hexadecimal.
Default: 8 (ASCII value
^H
)
Echo
Defines the echo character. When
Line
Mode
is
On
, typing the echo character
echoes the text locally and sends only completed lines to the host. This value is
in hexadecimal.
in hexadecimal.
Default: 5 (ASCII value
^E
)
Escape
Defines the escape character. Returns you to the command line mode. This
value is in hexadecimal.
value is in hexadecimal.
Default: 1d (ASCII value
GS
)