StarTech.com R300WN22OP5E 사용자 설명서

Instruction Manual

6

1.  Connect the included power adapter to an available wall outlet and the DC jack 

on the PoE injector.

2.  Connect an Ethernet cable from the LAN port of the PoE Injector to your LAN 

switch or router.

3.  Connect a second Ethernet cable from the PoE port of the PoE Injector, the other 

end of this cable will connect to the AP as instructed in the following steps.

4.  Slide the bottom cover of the unit down to remove it and expose the ports.
5.  Connect the Ethernet cable from the PoE port of the PoE Injector, to the LAN 

port on the AP (farthest from the reset button). 

6.  Slide the cover back on as shown. 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note that the AP may take approximately 50 seconds to complete the power 

on sequence.

Operation

The following steps outline the basic configuration for the AP. For details on 

the Advanced configuration options available, please visit www.StarTech.com/

R300WN22OP5 for the full manual

Default IP Address: 192.168.1.200 
Default subnet mask: 255.255.255.0 
Web / Telnet User Name: admin 
Web / Telnet Password: admin