Siemens SX763 사용자 설명서
29
First steps
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / device_763.fm / 08.12.2006
Sc
hablone 2
004_
08_2
6
Checking the operating state
Your Gigaset SX763 WLAN dsl is now ready for use. The LED displays on the front panel
of the Gigaset SX763 WLAN dsl provide information about the operating state:
The LEDs (from left to right) have the following functions:
of the Gigaset SX763 WLAN dsl provide information about the operating state:
The LEDs (from left to right) have the following functions:
LED
State
Status
Power
On (green)
The Gigaset SX763 WLAN dsl is connected to the mains.
Off
The Gigaset SX763 WLAN dsl is disconnected from the
mains.
mains.
ADSL
On
A DSL connection is established.
Flashing
The DSL line is being synchronised. The synchronisation
phases are shown as slow flashing (registering) and fast
flashing (training).
If no DSL cable is connected, the LED will flash at uniform
intervals.
phases are shown as slow flashing (registering) and fast
flashing (training).
If no DSL cable is connected, the LED will flash at uniform
intervals.
Off
DSL is deactivated.
Line
On
One of the connected phones' receivers has been lifted for a
call (fixed network telephony).
call (fixed network telephony).
Flashing
The phone is ringing and a fixed network call is being
received or someone is waiting on the line.
received or someone is waiting on the line.
Off
There is currently no fixed network connection.
Online
On
Connection to the Internet has been established.
Off
There is no Internet connection.
USB
On (green)
A device is connected to the Gigaset SX763 WLAN dsl via the
USB port.
USB port.
Flashing
(green)
(green)
The connected device is active.
Flashing
quickly
quickly
The device connected on the USB port is using too much
power (see (page 131)).
power (see (page 131)).
Off
There is no device connected.
LAN1 –
LAN4
LAN4
On
A device is connected to the relevant LAN port.
Flashing
The relevant LAN port is sending or receiving data (traffic).
Off
There is no device connected.
WLAN
On
The radio interface is active.
Flashing
The Gigaset SX763 WLAN dsl is sending or receiving data on
the radio interface.
the radio interface.
Off
The radio interface has been deactivated or no radio signal
is being received.
is being received.
VoIP
On
At least one port is configured for VoIP and VoIP access is
registered with the provider.
registered with the provider.
Flashing
A call is currently being made via the Internet.
Off
There is currently no connection for Internet telephony.