Energizer 2103G 사용자 설명서

2-9

2. In the Phone Number list box, type the contact telephone 

numbers. These must be valid TAP access numbers. You 
must enter at least one number; you can enter as many as 
five. When an alarm condition is triggered, the system will 
try dialing each phone number in the list. 

a. To find this number, and the communications parame-

ter settings, consult with your pager service, or go to 

 

or to 

.

b. With either online location, click the letter correspond-

ing with the first letter of the name of your service pro-
vider. You will advance to a screen that shows your 
service provider, the access number, and parameter val-
ues (Figure 2-8).

3. For each phone number entered, enter a Pager ID, which is 

the phone number of the cell phone or pager that will 
receive the text message. (The ID will come from your 
pager service.)

4. You have the option of entering a password of up to six 

characters in length.

5. In the Comm field, select 7E1 or 8N1for the communica-

tions control specification (your pager service has this 
information).

6.

You must enter a message to be sent to the pager. In the field 
labeled Message,

 type the outgoing text message (maximum 

of 32 characters).

7. Under “Alarm condition”, select the desired alarm parame-

ter from the drop-down list, then define the alarm condi-
tions.

8. Click the Apply button or press F9 when you are done, to 

update the module’s settings.

TAP service 
number and 
parameter 
values