Edimax Technology EW-7438RPn 사용자 설명서

다운로드
페이지 92
37 
V. Appendix 
 
V-1. 
Configuring your IP address 
 
For first time access to the URL http://edimaxext.setup on a computer please 
ensure your computer is set to use a dynamic IP address. This means your 
computer can obtain an IP address automatically from a DHCP server. You can 
check if your computer is set to use a dynamic IP address by following V-1-1. 
How to check that your computer uses a dynamic IP address

 
Static IP users can also temporarily modify your computer’s IP address to be 
in the same IP address subnet e.g. 192.168.9.x (x = 3 – 254) as the 
EW-7438RPn Air in order to access http://edimaxext.setup
 
The EW-7438RPn Air’s default IP address is 192.168.9.2. 
 
The procedure for modifying your IP address varies across different operating 
systems; please follow the guide appropriate for your operating system in 
V-1-2. How to modify the IP address of your computer. 
 
Static IP users please make a note of your static IP before you 
change it. 
 
You can assign a new IP address to the extender which is within the subnet of 
your network during setup or using the browser based configuration interface, 
so that you can access the URL http://edimaxext.setup in future without 
modifying your IP address. 
 
Please remember to change your IP address back to its original 
value after the device is properly configured.