Fujitsu AP-500RP 데이터 시트
Data Sheet CONNECT2AIR WLAN AP-500RP Issue October 2002
Standard features
§
§
Conform to IEEE 802.11 and IEEE 802.11b
§
64 / 128-bit key RC4 encryption
§
MAC Address Control
§
Web-based management
§
Powerful performance for the most demanding
network applications such as Radio Streaming
network applications such as Radio Streaming
§
Enhanced roaming across disparate locations and
infrastructures
infrastructures
§
Integrated DHCP Server
§
Supported ISP connection types: PPPoE, PPTP,
Dial-up via Analog/ISDN modem, fix or dynamic IP
Dial-up via Analog/ISDN modem, fix or dynamic IP
Interfaces
§
§
One RJ-45 port for 10Mbit/s Ethernet WAN
connection
connection
§
Auto-sensing 2-port switch for 10/100Mbit/s
Ethernet LAN connection
Ethernet LAN connection
§
One serial port for PSTN/ISDN dial-up connection
and console configuration
and console configuration
§
One DB-25 parallel port for printer server
§
High speed wireless LAN (IEEE 802.11b DSSS)
Environmental specifications
Temperature
Humidity
Operating
0
°
C to 50
°
C 95% (non condensing)
Storage
-10
°
C to 60
°
C 95% (non condensing)
Barometric pressure
740 hPa to 1050 hPa
Hardware specifications
Processor
Processor
RDC 8822
Memory
512Kbit DRAM
512Kbit Flash
LAN
2 x RJ-45 LAN / 10/100 Mbit/s
auto-sensing
WAN
1 x RJ-45 WAN / 10 Mbps WAN
Printer port
1 x IEEE1284 DB-25 (parallel)
COM port
1 x DB-9 RS-232C (serial)
Radio characteristics
Frequency Range
Frequency Range
2412 MHz to 2462 MHz (ISM)
Channel Frequencies
11 freely selectable channels
Antenna System
Diversity antenna
Bit Rate
11 Mbit/s, 5.5 Mbit/s, 2 Mbit/s,
1 Mbit/s (Automatic Rate
Selection)
1 Mbit/s (Automatic Rate
Selection)
Output Power
16 dBm (max.)
Typical Range *
11 Mbit/s
1 Mbit/s
open environment
100 m
300 m
closed environment
35 m
100 m
Receiver sensitivity PER < 8%
-81 dBm
-92 dBm
Typical throughput (excluding
headers, etc) using TCP/IP
headers, etc) using TCP/IP
5 Mbit/s 0.8 Mbit/s
* Above listed throughput and range values are typical
characteristics and depend on positioning of the
Access Point, Clients and environmental influences
and cannot be guaranteed.
Access Point, Clients and environmental influences
and cannot be guaranteed.
Additional features
§
§
Seamless roaming within the 802.11b WLAN
infrastructure
infrastructure
§
Provide 10Base-T WAN interface to connect with
DSL or Cable modem for broadband Internet access
DSL or Cable modem for broadband Internet access
§
Asynchronous port for backup routes when the
broadband modem fails or is disconnected
broadband modem fails or is disconnected
§
Built-in NAT function: allows multiple PCs and
devices to share one Internet connection
devices to share one Internet connection
§
VPN support: PPTP / IPSec pass-through
§
Built-in firewall to protect your Intranet
§
Access limitation: allow or deny every single
wireless device to access the WLAN or LAN
wireless device to access the WLAN or LAN
§
Browser-based interface for configuration and
management: OS independent, easy-to-use for
quick installation and management of the device
management: OS independent, easy-to-use for
quick installation and management of the device
§
Easy to upgrade: using Web, Windows application,
or FTP to upgrade new version of firmware
or FTP to upgrade new version of firmware
§
Built-in printer server: dedicating a personal
computer as print server is not needed
computer as print server is not needed
§
Roaming: AP can be linked via LAN
(Distribution system)
(Distribution system)
Configuration and management
Web-based Utilities
TFTP support
HTTP server for web-based management
Multilanguage support: German, English, French, Italian
and Spanish
LED displays
Power
Web-based Utilities
TFTP support
HTTP server for web-based management
Multilanguage support: German, English, French, Italian
and Spanish
LED displays
Power
Power Indication
M1
System Status AP-500RP
WAN
WAN port activity
WLAN
Wireless activity
Link/Act. (1, 2)
Link status of corresponding LAN port
10/100 (1, 2)
Data Rate of corresponding LAN port
System requirements
PC with 802.11b WLAN Card or network card
Includes
AP-500RP AccessPoint
Power cord
Quick Installation Guide
External Power supply, Input 100/240 V AC, 50/60 Hz
CD with software and documentation
Cat. 5 patch cord
Physical specifications
Dimensions:
PC with 802.11b WLAN Card or network card
Includes
AP-500RP AccessPoint
Power cord
Quick Installation Guide
External Power supply, Input 100/240 V AC, 50/60 Hz
CD with software and documentation
Cat. 5 patch cord
Physical specifications
Dimensions:
220 x 142.5 x 38 mm
Weight:
510 g
Supported Operating Systems
AccessPoint configuration: Win 95, Win 98 (SE),
Win ME, Win NT, Win 2000, Win XP, Linux, Macintosh
Printer Server SW: Win 95, Win 98 (SE), Win ME,
Win NT, Win 2000, Win XP
Warranty
2 years
Order code
S26391-F2515-L500
AccessPoint configuration: Win 95, Win 98 (SE),
Win ME, Win NT, Win 2000, Win XP, Linux, Macintosh
Printer Server SW: Win 95, Win 98 (SE), Win ME,
Win NT, Win 2000, Win XP
Warranty
2 years
Order code
S26391-F2515-L500
Published by
Fujitsu Siemens Computers
Fujitsu Siemens Computers
http://www.fujitsu-siemens.ch
All rights, including rights created by patent grant or registration of a utility
model or design, are reserved. Delivery subject to availability; right of
technical modifications reserved.
All hardware and software names used are trade names or trademarks of
their respective manufacturers.
Copyright
model or design, are reserved. Delivery subject to availability; right of
technical modifications reserved.
All hardware and software names used are trade names or trademarks of
their respective manufacturers.
Copyright
Ó
Fujitsu Siemens Computers, 11/2002
Company stamp