Fortinet 500A 사용자 설명서

You can use the web-based manager to complete the initial configuration of the 
FortiGate unit. You can continue to use the web-based manager for all FortiGate unit 
settings.

For information about connecting to the web-based manager, see 

.

The first time you connect to the FortiGate unit, it is configured to run in NAT/Route 
mode.

Go to System > Status.

Select Change beside the Operation Mode.

Select Transparent in the Operation Mode list.

Select OK.

To reconnect to the web-based manager, change the IP address of the management 
computer to 10.10.10.2. Connect to port 1 and browse to https:// followed by the 
Transparent mode management IP address. The default FortiGate Transparent mode 
Management IP address is 10.10.10.1.

Go to System > Network > Management.

Enter the management IP address and netmask that you recorded in 

Select access methods and logging for any interfaces as required.

Select Apply.

Go to System > Network > DNS.

Enter the IP address of the primary DNS server.

Enter the IP address of the secondary DNS server.

Select OK.

IP:T

_____._____._____._____

Netmask:

_____._____._____._____

Default Gateway:

_____._____._____._____

The management IP address and netmask must be valid for the network 

from which you will manage the FortiGate unit. Add a default gateway if the 

FortiGate unit must connect to a router to reach the management 

computer.

Primary DNS Server:

_____._____._____._____

Secondary DNS Server: _____._____._____._____