Fujitsu P2X0-0202-01EN 사용자 설명서
All Rights Reserved, Copyright © FUJITSU LIMITED 2007
4
1.2 ETERNUSmgr Functions
ETERNUSmgr User Guide -Introduction- P2X0-0202-01EN
1.2
ETERNUSmgr Functions
ETERNUSmgr provides the following three functions.
• Target Device Configuration Browser
• Target Device Monitoring and Failure Notification
• Target Device Setup and Maintenance
• Target Device Monitoring and Failure Notification
• Target Device Setup and Maintenance
■
Target Device Configuration Browser
This displays the hardware structure of the target devices.
■
Target Device Monitoring and Failure Notification
Target device failure is monitored for. When a failure occurs, a history of the fault is saved as an HTML
file (called an "alarm history file" from here on), and the administrator is notified by E-mail of the file's
location and content. As the alarm history file is kept for a fixed period of time, the administrator can
browse the failure history later, as time permits.
The error monitoring function records the enclosure number where the error occurred. The error monitor-
ing function can detect only the error location in terms of drive enclosures, controller enclosures, and bat-
tery enclosures, not detailed error location such as hard disk, CPU, etc. To obtain detailed location once an
error is detected, please use ETERNUSmgr's [Device Status Display] window (the window in which the
entire device is displayed).
Specifically, when an error has been detected, the red warning lamp for an enclosure (Drive Enclosure,
Controller Enclosure, Battery Enclosure) on the [Device Status Display] window is activated. For details
on the [Device Status Display] window, see "ETERNUSmgr User Guide -Settings/Maintenance-".
The extent to which a device can be monitored depends on its model number. Components that can be
monitored for each type of target device are shown in the following list.
file (called an "alarm history file" from here on), and the administrator is notified by E-mail of the file's
location and content. As the alarm history file is kept for a fixed period of time, the administrator can
browse the failure history later, as time permits.
The error monitoring function records the enclosure number where the error occurred. The error monitor-
ing function can detect only the error location in terms of drive enclosures, controller enclosures, and bat-
tery enclosures, not detailed error location such as hard disk, CPU, etc. To obtain detailed location once an
error is detected, please use ETERNUSmgr's [Device Status Display] window (the window in which the
entire device is displayed).
Specifically, when an error has been detected, the red warning lamp for an enclosure (Drive Enclosure,
Controller Enclosure, Battery Enclosure) on the [Device Status Display] window is activated. For details
on the [Device Status Display] window, see "ETERNUSmgr User Guide -Settings/Maintenance-".
The extent to which a device can be monitored depends on its model number. Components that can be
monitored for each type of target device are shown in the following list.