Fujitsu P2X0-0202-01EN 사용자 설명서
Chapter 3 Startup and Shutdown
37
P2X0-0202-01EN ETERNUSmgr User Guide -Introduction-
All Rights Reserved, Copyright © FUJITSU LIMITED 2007
3
● For Windows Server® 2003 or Windows Server® 2003 R2
3.2.2
Shutting Down ETERNUSmgr
Perform the following to manually shutdown ETERNUSmgr for Windows®:
Procedure
1
Select the [STXPOLL] service from [Services] on the [Administrative Tools] of the
[Control Panel], and click the [Stop] button.
[Control Panel], and click the [Stop] button.
3.2.3
Registering the ETERNUSmgr Service for Automatic Startup
After installation is completed, ETERNUSmgr for Windows® is already registered as an automatic startup
service that will become active the next time the server is rebooted, so there is no need to manually set
ETERNUSmgr for automatic startup.
service that will become active the next time the server is rebooted, so there is no need to manually set
ETERNUSmgr for automatic startup.
If, for any reason, the ETERNUSmgr automatic startup setting is disabled, do the following to restore it.
This setting will be enabled at the next server reboot.
This setting will be enabled at the next server reboot.
Procedure
1
Select the [STXPOLL] service from [Services] on the [Administrative Tools] of the
[Control Panel], then set the startup method to: [Automatic].
[Control Panel], then set the startup method to: [Automatic].
To disable automatic startup of ETERNUSmgr, set the startup method to [Manual] in the above
procedure.
procedure.