Juniper Networks J2320 사용자 설명서
Figure 31: Channelized T1/E1/ISDN PRI PIM
The Dual-Port Channelized T1/E1/ISDN PRI PIM provides the following key features:
■
Onboard network processor
■
Two-port channelization
■
Interfaces that are software configurable as T1 or E1 channels or ISDN PRI
B-channels
B-channels
■
Clear-channel, fractional, and channelized operation
■
Lower latency due to the addition of a Freescale processor
■
Maximum MTU value of 4500 bytes (for channelized T1 or E1 interface) and
4098 bytes (for ISDN PRI services)
4098 bytes (for ISDN PRI services)
NOTE: For a clear-channel T1 or E1 interface, the maximum MTU is 9150 bytes.
■
56-Kbps and 64-Kbps modes
■
ANSI T1.102, T1.107, and T1.403 standards compliance
■
G.703, G.704, and G.706 E1 standards compliance
■
Independent internal and external clocking system
■
Loopback, bit error rate test (BERT), T1 facilities data link (FDL), and long buildout
diagnostics
diagnostics
For pinouts of cable connectors for channelized T1/E1/ISDN PRI PIMs, see “ISDN
RJ-45 Connector Pinout” on page 241.
RJ-45 Connector Pinout” on page 241.
To install or remove a PIM, see “Replacing a PIM” on page 174.
NOTE: The STATUS LED displays channelized T1 or E1 port activity and alarms only.
It does not display ISDN PRI B-channel or D-channel status.
It does not display ISDN PRI B-channel or D-channel status.
58
■
Field-Replaceable PIMs
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide