Intellinet Network Solutions 524445 사용자 설명서

4. Check all LEDs on the front panel. The PWR LED should be on, and

the WAN and LAN LEDs should be on if the computer or network

device connected to the corresponding router port(s) are powered on

and correctly connected.

5. Connect your computer to one of the LAN ports of the router, then

activate the network connection. Start the Web browser — e.g., MS

Internet Explorer — and open

http://192.168.2.1 to display a

6. Enter “admin” for username

and “1234” for password.
Additional install instructions —

as well as explanations for all

the setup options — can be

found in the user manual on the

enclosed CD.

Safety Guidelines

• Do not place this router outdoors or near excessive heat or humidity.

• Do not yank any connected cables; disconnect them gently.

• If placing this device at heights or on a wall, make sure it’s firmly

secured to prevent damage or possible injury.

• Router parts (antenna, power supply, etc.) are dangerous should children

put them in their nose or mouth. Keep out of the reach of children!

• It’s normal for the router to become hot when used a long time, so keep

the router away from paper, cloth and other flammable materials.

• There’s no user-serviceable part inside the router. If you find that the

router is not working properly, contact your dealer (place of purchase)

and ask for help. Do not disassemble the router: Doing so will void

the warranty.

• If the router falls into water while turned on, Do not touch it to remove

it! Turn off its power source before you do anything, or contact an

experienced technician for help.

• If smoke or strange odors emanaye from the router or power supply,

remove the power supply or turn the power off immediately.