Proxim AP-2000 사용자 설명서

115

Use the Retrieve File via TFTP tab to upload files from the AP to the TFTP server. The TFTP server must be running 
and configured to point to the directory to which you want to copy the uploaded file. We suggest you assign the file a 
meaningful name, which may include version or location information.
If you don’t have a TFTP server installed on your system, install the TFTP server from the ORiNOCO CD. You can 
either install the TFTP server from the CD Wizard or run OEM-TFTP-Server.exe found in the CD’s Xtras/SolarWinds 
sub-directory.
The Retrieve AP via TFTP tab shows version information and allows you to enter TFTP information as described 
below.
•

Server IP Address: Enter the TFTP server IP Address.
–

Double-click the TFTP server icon on your desktop and locate the IP address assigned to the TFTP server.

•

File Name: Enter the name of the file to be uploaded. 

•

File Type: Select the type of file to be uploaded: Config file, CLI Batch File, or CLI Batch (Error) Log.

Use the following procedure to retrieve a file from an AP to a TFTP server:

1. If retrieving a Configuration file, configure all the required parameters in their respective tabs. Reboot the device.
2. Retrieve and store the file. Click the Retrieve File button to initiate the upload of the file from the AP to the TFTP 

server. 

3. If you retrieved a Configuration file, update the file as necessary.
4. If you retrieved a CLI Batch File or CLI Batch Log, you can examine the file using a standard text editor. For more 

information on CLI Batch Files, refer to