Proxim AP-2000 사용자 설명서

17

Each Dual-radio AP comes with the following:
•

One ceiling or wall mounting plate

•

Mounting hardware

•

Metal faceplate for APs mounted in a plenum environment

•

AP cover

•

Processor module (with integrated Active Ethernet, if applicable)

•

Power supply (not provided with Active Ethernet unit)

•

AC power cord (not provided with Active Ethernet unit) 

•

802.11b PC Card or 802.11b/g AP Card

•

One Installation CD-ROM that contains the following:
–

Software Installation Wizard

–

ScanTool

–

Solarwinds TFTP software

–

HTML  Help

–

this user’s guide in PDF format

•

One Access Point Quick Start Guide

If any of these items are missing or damaged, please contact your reseller or Technical Support (see 

 for contact information).

The 5 GHz Antenna Adapter or 11a Upgrade Kit can be used in the Access Point. Because 802.11a requires an 
antenna adapter, only one 5 GHz radio can be installed in the AP. The second slot can be populated with an 802.11b or 
802.11b/g card.

To begin using an AP, you must have the following minimum requirements:
•

A 10Base-T Ethernet or 100Base-TX Fast Ethernet switch or hub

•

At least one radio card designed for the AP: an 802.11b PC Card, 802.11b/g Card, 5 GHz Antenna Adapter Kit, or 
11a Upgrade Kit

•

At least one of the following IEEE 802.11-compliant devices:
–

An 802.11a client device if you have an 802.11a AP

–

An 802.11b or 802.11b/g client device if you have an 802.11b AP

–

An 802.11b/g client device if you have an 802.11b/g AP

–

An 802.11a/g client device if you have an 802.11a/g AP

•

A computer that is connected to the same IP network as the AP and has one of the following Web browsers 
installed:
–

Microsoft Internet Explorer 6 with Service Pack 1 or later and patch Q323308

–

Netscape 6.1 or later

(The computer is required to configure the AP using the HTTP interface.)